CROWN MOULDING & DOOR LOGO
Wood Chair Rails

Chair rail moulding is usually installed between 33" and 35" from the floor around the perimeter of a room.   It is most often seen in a dining room and is used to protect the wall from damage by the backs of the chairs.  Set the height to correspond to the height of your dining room chairs.

Click on the moulding details below to see the types of wood available in that pattern.

#104 #105 #408 654e.jpg (6838 bytes) #403/#106 #424/122 516
#402/104
11/16" x 3-1/4"
#401/105
11/16" x 3"
#408
9/16" x 2-1/2"
#654E
1/2" x 2-7/8"
#403/106
5/8" x 2-1/2"
#424/122
5/8" x 2-1/2"
#516
13/16" x 2-3/8"
(rabbet adjustable  3/16" to 5/16")

Many door and window casings can also be used successfully as chair rails.  See the casing section for more profiles.

  Casings - Bases - Crowns - Miscellaneous - MDF


Crown Moulding & Door Co., Inc.
157 Radio Road
Corona, CA 92879
Phone: (951) 371-5621
Fax: (951) 272-3055
Home Page
emailed.gif (15360 bytes)
email us at  info@crownmoulding.com
revised November 25, 2013 by Rick Keane
www.crownmoulding.com